There’s special attention required to agriculture sector in present and in the future. We understand & fulfill this appetite for technology in this sector.
Atul is pioneer to design develop and market UPVC Pipes that are being successfully used in the erection of submersible borehole pumps up to depth of 1000 feet. More than 2,00,000 successful installations have taken place across the globe.
- Long Life
- No rusting, corrosion
- Light in Weight
- Easy Installation
- Cost Saver
- Power Saver
Best suited for extremes of Indian Climate with operational life over 50 years.
ATUL was incorporated in the year 1962. Within a short span of the time company becomes one of the leading manufacturer & exporter of pumps, diesel engine pumps, centrifugal pumps, submersible pumps, monoblock pumps, centrifugal pumps, sevage pumps, self priming pumps & customized pumps in India.
Each component to the pump is subjected to rigorous inspection at various stage of manufacture and assembly resulting in a high quality standard of the pump.
Diesel engines both in the indigenous market and abroad have received approbation for their reliability, economy in operation, durability longer life and exquisite performance. Specially designed to meet the needs of the agricultural sector and multi various general uses.
Vertical, Water cooled, Air cooled, Compression ignition, Four stroke cycle, Cold start, constant speed diesel engines. Engines are water cooled and cooling is arranged by run through water supply or radiator or cooling tank.
Our Generating sets are appropriate answer to frequent power failure and flickering of supply voltages to save all House hold appliances and all type of Costly Gadgets.
SALIENT FEATURE : The Generating set consist of one Diesel Engine as prime mover and one Alternator as power generating source and both are coupled through self aligning rubber coupling and mounted on a robust Mild steel channel frame fitted on rubber wheels which provides the sets easy movability and acts as damper to vibration.
Life is not possible without power but power-cuts are famous in our country. We cater the same issue and provide the solution through latest technology.
Today ATUL Group Of Industries, manufacturers of complete Silent Generating sets proudly stand apart joined by very few of its cadre in India complying to the latest Environment norms. Most of our Diesel Engines range suitable for Gen-set application are Emission certified for smoke & mass by ARAI, Pune (authorized agency by CPCB )
- Most of our Gen-sets Range are certified /Type approved for Noise norms by NPL, New Delhi (authorized agency by CPCB) (certificate attached)
- In comparison to our competitors , our product comprises of:-
- Low on emission
- Low maintenance cost
- Low vibrations
- Light weight
- In the view of moving towards Environment policy we have 100% BIO GAS , BIO MASS, NATURAL GAS based Gen-sets.
- Our company strictly follows Environmental Management System which complies with ISO 14001: 9001
- We are also ready for the upcoming bis norms for 2013 by CPCB.
Electronic regulators made of state-of-the-art electronic components to assure high performance & reliability. Electronic regulators equipped with output voltage regulator trimmer, a stability control trimmer & a low frequency protection trimmer.
- Small and compact size.
- Durable under dust, damp and vibration.
- Under frequency protection : When the generator frequency drops below the set point, generator output voltage is decreased with the curve proportional to the frequency.
- Over Excitation : In case of over excitation the AVR shuts down the output to protect the generator winding coil from burning out.
Construction sector required two very basic supplies; Water & Raw Material; So we put our experience of decades and make them comfortable.
Atul Engineering Udyog is an ambitious industrial venture of Agra. It is the oldest and core unit of famous ATUL GROUP OF INDUSTRIES. It was established in the year 1994 and commenced production in1985 and become the first foundry in Agra to become ISO:9001/1994 certified w.e.f. 15/6/200.
The Company manufactures and supplies high precision ferrous castings and grinding media of following type and orange:
(a) Iron and Alloy Steel Castings upto 200 Kg.
(b) Side Buffer Arrangement with face plate riveted (1000 KGM & KGM)
(c) Loco Side Buffer (BG) Min. Assembly
(d) Hyper steel and High Chrome steel grinding media balls.
Water Tanks & Pipes
ATUL PREMIUM WATER STORAGE TANKS are manufactured on ‘Bi-axial Three Arm Rotational Moulding Machine’, latest Technology which provides uniform wall thickness, strength and smooth finish. Atul Tanks are manufactured from Linear Low Density Poly Ethylene (LLDPE) as per the latest BIS specifications.
- Light Weight
- Maintenance Free
- High Impact Strength
Capacity – 200 Ltrs. to 5000 Ltrs.
(2 to 5 layers)
Colour – Available in different Colour
Submersible & Hand Pumps
ATUL was incorporated in the year 1962. Within a short span of the time company becomes one of the leading manufacturer & exporter of V3, V4 submersible pumps, open well submersible pumps, monoblock pumps, centrifugal pumps, sevage pumps, self priming pumps & customized pumps in India
It was ATUL to introduce V-3 & V-4 submersible pumps in Indian Market.
To meet with global objective of community development and to provide safe potable water to every citizen within a accessible distance. Atul Deepwell & Hand Pumps are manufacturing ATUL DEEPWELL & HAND PUMPS India Mark-II.