Hyper steel Grinding
Media Balls and Cylpebs as per IS 6079-1980:
(a) CHEMICAL COMPOSITION: The
chemical composition of the grinding media will be as per
IS 6079-1980: as follows:
| |
GRADE-1
(For size 60 mm & above) |
GRADE-2
(For size below 60 mm) |
| Carbon |
1.10-1.60 |
1.50-2.00 |
| Silicon |
1.00 Max. |
1.00 Max. |
| Manganese |
0.90-1.60 |
0.90-1.60 |
| Chromium |
1.20-2.40 |
1.20-2.40 |
| Sulphur |
0.06 Max. |
0.06 Max. |
| Phospherous |
0.06 Max. |
0.06 Max. |
(b) HARDNESS: When tested in
accordance with IS 1500/1983 the hardness at any point
across the section of the ball is more than 375 BHN.
(c) MICROSTRUCTURE:
Microstructure shall be free from continuous carbide
network.
(d) HEAT TREATMENT: The
grinding media is suitably heat treated to obtain the
required hardness and Microstructure.
(e) STANDARD SIZE OF GRINDING
MEDIA:
Balls diameter (mm)-100,90,80,75,70,65,60,50,40,30,25,
& 20
Cylpebs (mm)-25x25, 22x22, 19x19
OTHER TECHNICAL
SPECIFICATIONS WILL CONFORM TO IS 6079-1980
(f) TOLERANCE ON SIZE:
Variation on size shall not exceed the following limits:-
| SHAPE
AND SIZE |
TOLERANCE
(mm) |
| (1)
Balls for sizes 60 mm & above |
+/- 3.00 |
| (2)
Balls for sizes 50 mm & below |
+/- 2.50 |
| (3)Cylpebs
for all sizes |
+/- 1.50 |
Hyper steel Grinding
Media Balls and Cylpebs as per IS 6079-1980:
(a) CHEMICAL COMPOSITION: The
chemical composition of the grinding media will be as per
IS 6079-1980: as follows:
| |
GRADE-1
(For size 60 mm & above) |
GRADE-2
(For size below 60 mm) |
| Carbon |
1.25-1.50 |
1.60-1.90 |
| Silicon |
1.00 Max. |
1.00 Max. |
| Manganese |
1.20-1.50 |
1.20-1.50 |
| Chromium |
1.50-2.00 |
1.50-2.00 |
| Sulphur |
0.06 Max. |
0.06 Max. |
| Phospherous |
0.06 Max. |
0.06 Max. |
(b) HARDNESS: When tested in
accordance with IS 1500/1983 the hardness at any point
across the section of the ball is more than 375 BHN.
| SHAPE AND
SIZE |
TOLERANCE
(mm) |
| (1)
Balls for sizes 60 mm & above |
+/- 2.50 |
| (2)
Balls for sizes 50 mm & below |
+/- 2.00 |
| (3)
Balls for sizes 25 mm to15mm & Cylpebs for all
sizes |
+/- 1.50 |
High chrome steel
Grinding Media Balls and Cylpebs
(a) CHEMICAL COMPOSITION: The
chemical composition of the grinding media will be as
follows:
| |
ATUL-1 |
ATUL-2 |
| Carbon |
1.50-3.00% |
2.0-3.0% |
| Silicon |
0.40-1.00% |
0.4-1.5% |
| Manganese |
0.60-2.00% |
0.6-2.0% |
| Chromium |
12.0-16.00% |
16.0-20.0% |
| Molybdenum |
0.50 Max. |
0.5-1.0% |
| Sulphur |
0.06% Max. |
0.06% Max. |
| Phospherous |
0.06% Max. |
0.06% Max. |
(b) HARDNESS: When tested in
accordance with IS 1500/1983 the hardness at any point
across the section of the ball is 600 BHN.
(c) MICROSTRUCTURE: Fine
martensitic structure with dispersed Eutetic secondary
carbides.
(d) HEAT TREATMENT: The
grinding media is suitably heat treated to obtain the
required hardness and Microstructure.
(e) STANDARD SIZE OF GRINDING
MEDIA:
Balls diameter (mm)-100,90,80,75,70,65,60,50,40,30,25,
& 20
Cylpebs (mm)-25x25, 22x22, 19x19, 16x16
OTHER TECHNICAL
SPECIFICATIONS
(f) TOLERANCE ON SIZE:
Variation on size shall not exceed the following limits:-
| SHAPE
AND SIZE |
TOLERANCE
(mm) |
| (1)
Balls for sizes 60 mm & above |
+/- 3.00 |
| (2)
Balls for sizes 50 mm & below |
+/- 2.50 |
| (3)Cylpebs
for all sizes |
+/- 1.50 |
|
